This is the final screen from the v3.6 MyFord Touch self-installation process.

• Download Latest Sync Software Ford Explorer 2016
• Download Ford Sync Latest Version
• Download Latest Sync Software Ford Explorer 2017

Vincent Hennigan
Ford Sync Specialist

It’s here!!! The MyFord Touch version 3.6 is available by going to the new website support.ford.com — and from initial quick tests… everything seems to work seamlessly and smoothly.

The new software update for SYNC with MyFord Touch systems includes all the improvements from previous updates, plus additional benefits, such as:

• .Make sure you read your SYNC ® /SYNC ® 2/SYNC ® 3 Owner’s Manual before using this feature for the first time. This site provides useful information on commonly used features but is not intended to replace the detailed instructions and warnings contained in your SYNC ® /SYNC ® 2/SYNC ® 3 Owner’s Manual. SYNC ® is available on most Ford vehicles.
• Download the latest SYNC with MyFord Touch® software updates to a USB drive then install the software in your vehicle with step by step instructions. Ford personnel and/or dealership personnel cannot modify or remove reviews. Learn how to install SYNC software updates in your vehicle. Follow these step-by-step instructions to.

Improved system performance

Improved Home Screen Fifth gear rattle noise toyota 5 speed manual transmission kit.

Increased Touch Zones on Home Screen

Improved screen interactions while using voice

Jan 24, 2018  Learn how to update Ford SYNC with Glenwood Springs Ford. Download software updates from the Ford SYNC website onto a USB drive. If your Ford has the original Ford SYNC® infotainment system, it unfortunately cannot be upgraded to Ford SYNC® 3, the latest generation of the system. That’s becauseSYNC® 3-equipped vehicles have.

Updated support for phones and media players

Improvements to System Installation

Quicker install – less than 30 minutes

Persistence of Navigation Favorites during installation

Ford Motor Company periodically releases SYNC^® software updates to deliver the most advanced technology and this version was designed to hit some of the issues that have been out there — especially with ease of use.

Updates are tailored to your SYNC with MyFord Touch^® system, and will vary based on your system’s current software level. The best way to find out what’s available is to log in to your SYNC Owner account at support.ford.com If you haven’t opened an account at this site, then open one up. The site will tell you if you need the update and guide you through the entire process.

Here is a quick overview of the steps to start the software upgrade:

Step 1 – Connect a USB drive to your computer. Before you begin, please make sure your USB drive is empty, has at least 2GB of free space, and is not password protected.

Step 2 – Get the update. The software download process requires your browser to have Java installed and enabled. If your browser prompts you to run a Java application from Ford Motor Company, please click “Run” to continue. You may also receive a security warning. Please click “Don’t Block” to continue. Be patient. it may take 10 minutes or more to download the software update. And, using other programs during the download will slow down the process.

Now, take the USB from your computer and go to your vehicle…

Step 3– Take the USB drive with the software updates to your vehicle. Turn on your vehicle, and then turn on the radio.

Make sure your car is in a well-ventilated area. Your vehicle will need to be turned on, with the engine running between 25 to 35 minutes. Make sure that your vehicle is not in Accessory mode.

Plug the USB drive in to your vehicle’s USB port. The system should start the download process within a few seconds…

With the MyFord Touch system, now let your vehicle run and the entire download process takes about 25 minutes. While the process is going on, remove the SYNC system from your phone or device. You will have to pair it again after the installation.

Download Latest Sync Software Ford Explorer 2016

SYNC displays “Installing Application” during the process. Do not remove your USB drive or turn off your vehicle while this update is in progress. Shortly after installation has begun, SYNC says “Installation Complete.” Ignore this message. It refers to a specific phase of the installation, not the overall update process. While the update is loading, SYNC will not recognize your mobile phone or media device.You will notice the software upgrade goes through at least five “sessions” of installing software and then “rebooting.” Be patient. Let the system run through the process and, as stated, in about 25 to 30 minutes will bring up the screen pictured above and once you push OK the process will end.

Once you have installed the SYNC software updates, you’ll need to pair your phone again. To complete the process, take the USB drive to your computer to report the successful installation (at the support.ford.com website).

Download Ford Sync Latest Version

You will notice that the MyFord Touch system seems more intuitive after the update. You will see a reference page appear after you push the Voice button that will assist in using the Voice commands.

Best of all, you could be listening to the Radio, using the Climate control or the Destination features and you can simply say “Call (contact name) and the Sync system knows you want to make a call without having to first say “Phone.” However, you will have to refer first to the mode if you want to go from Audio to Climate, for example.

Download Latest Sync Software Ford Explorer 2017

More on the use of the upgrade after some “field testing.” For now, grab an empty USB jump drive and take “new control” of your MyFord Touch system. For those who aren’t comfortable with the self-installation process, please contact your Ford Service Department or your Ford sales representative.